Swimming Pool Cover - Manufacturers, Suppliers & Exporters

Many people consider using pool covers for their inground or above ground pool (or spa) as it increases the value and return on your investment. When your pool cover is fitted, make sure the pool size is measured properly and the cover cut in properly so there are no gaps. It is common to make a pool cover up to 75 mm larger on each side so it forms a lip around the entire edge. Gaps in the edging will reduce the overall efficiency that the pool cover can offer.

When using the pool, make sure the pool cover is stored away from sunlight and rolled up properly. The added expense of a pool roller will not onlyhelp your pool blanket last longer, but it also makes removal and refitting a lot easier.

Lastly make sure your chemical levels are not allowed to go too high, as prolonged exposed to high chemical levels will shorten the life of all pool covers. Chlorine levels should not exceed 1.5 to 2.0 ppm for unstabilised pools and 3.0 ppm for stabilised pools (source SPASA pool cover fact sheet,http://www.spasa.org.au/images/stories/SPASA/factsheets/2014facts/FS6.pdf) . Also never super chlorinate with the pool cover on, leave the cover off until level return to normal. Automatic chlorine dosers should also be run at a reduced rate.

Clean Your Tank Regularly - Your Rain Water Tank

Fix Leaks : As rain water tank get older they can to form cracks and leak. This can arise from ground movements or structural defects like rust (in the case of steel tanks). When fixing a tank, there are only a few methods that can be considered:


Application of a sealant

pros – inexpensive for concrete tanks if done properly and is some cases the water won’t need to be drained before application.

cons – will not generally work on poly tanks, and needs to be flexible to accommodate tank movement.

Welding (plastic or steel)

pros – This is an effective way to repair poly tanks, as done properly the weld is about as strong as the original plastic.

cons – need to remove water to make repairs, and join strength is dependent on the skill of the operator.

Use of a tank liner

pros – very flexible and will move accommodate ground movements easily. Custom made to fit any tank. Usually comes with a 10yr guarantee. Will fit any almost any tank that is still structurally sound. Does not usually need the same level of preparation as applied coatings do. Also if you can get inside the tank, you can usually install the liner yourself.

cons – you will have to empty the tank. Must be careful with abrasive surfaces as it is possible to puncture lining.

For More Detail Visit:-  Water Tank

Portable spill bunds are easy to use

When a spill bunds or leak happens, its not just the inconvenience and cost of the cleanup that a company or individual will have to face. The EPA will also investigate and can impose additional fines, conditions and other restrictions that are deemed appropriate to the scale of the offence. So any spill is not only damaging to the environment, but can be a costly exercise that will waste much productive time.

 

Because the EPA covers such a broad range of areas, they have at their disposal and number of regulatory tools to help the enforce the law, including:

• Formal warnings
• Licence conditions
• Notices and directions
• Mandatory audits
• Enforceable undertakings
• Legally binding pollution reduction programs
• Prosecutions

Fabric Solutions Australia is a provider of portal spill bunds. These are used in variety of areas where the potential for contamination may occur. Uses include:

• Wash down applications
• Servicing or storing plant and equipment
• Drive on and off fuel transfers
• Storage of drum and containers

Portable spill bunds are particularly useful as they are re-usable and easy to re-locate. They can be bought “off the shelf” or readily customized to suit individual applications as required. So don’t chance the costly expense that a spill will incur (and likely fine), make sure your site is properly protected.

For More Detail About Pool Visit:- Pool Care