Clean Your Tank Regularly - Your Rain Water Tank

Fix Leaks : As rain water tank get older they can to form cracks and leak. This can arise from ground movements or structural defects like rust (in the case of steel tanks). When fixing a tank, there are only a few methods that can be considered:


Application of a sealant

pros – inexpensive for concrete tanks if done properly and is some cases the water won’t need to be drained before application.

cons – will not generally work on poly tanks, and needs to be flexible to accommodate tank movement.

Welding (plastic or steel)

pros – This is an effective way to repair poly tanks, as done properly the weld is about as strong as the original plastic.

cons – need to remove water to make repairs, and join strength is dependent on the skill of the operator.

Use of a tank liner

pros – very flexible and will move accommodate ground movements easily. Custom made to fit any tank. Usually comes with a 10yr guarantee. Will fit any almost any tank that is still structurally sound. Does not usually need the same level of preparation as applied coatings do. Also if you can get inside the tank, you can usually install the liner yourself.

cons – you will have to empty the tank. Must be careful with abrasive surfaces as it is possible to puncture lining.

For More Detail Visit:-  Water Tank

Benefits of using Fabric Solutions Tank liners

Tank liners such as PVC, Polyethylene and Polypropylene are designed to be used in tanks where the primary application is the storage of drinking water, and can also be manufactured to be used in other applications such as irrigation, rainwater collection, grey water, sewerage and stock water.

The great news is that once a liner has been installed, you only need to access the tank every year or two for cleaning and maintenance (as is standard with all tanks, regardless of if they have a liner or not). Tank liners are designed to fit in basically every type of tank available on the market, and can even be installed in tanks which do not conform to the standard shape of a circle or rectangle, as all tank liners are custom manufactured to suit your specifications.

Domestic water storage is becoming a necessity for many households due to natural occurrences such as droughts. As this is the case water tanks are fast becoming the norm for rural and domestic properties where town water is limited. The most common tanks used for this application are concrete, poly and corrugated steel tanks. Tanks however are suspect to leaks due to cracking and holes, and while welding and patching can temporarily fix the issue, more than likely more leaks and cracks will develop in the tank over time.

Website:- http://www.fabricsolutions.com.au

 Address:- 21-23 Access Ave, Yatala, QLD 4207

 Country:- AUSTRALIA

 Post Code:- 4207

 Phone: 0738070200

 Fax: +61 (07) 3807 8217

 Email: info@fabricsolutions.com.au

Time to get your Swimming Pool Ready 2 simple things you should do with any swimming pool

Winter is definitely gone and summer is soon to be here. If you have a Pool Cover  now is the time to prepare it for the heavy use of summer. There is nothing like the joy that having a swimming pool in your own backyard can bring. Not only can you cool down on hot days, but they enhance the look of your backyard. But swimming pools can be expensive to maintain, especially when the chemistry gets out of balance. Before you dive on in, thereThese are 2 basic things you can do to maintain a healthy swimming pool and reduce the time you looking after it.

Chemical Balance:

The most important aspect of any swimming pool is to keep all the chemicals in check and at optimum levels. Maintenance need not be time consuming either, and should only take a few minutes each day. To ensure the right pool chemical balance,

Daily (around 5mins when all is good with the pool)

1. check that the water is crystal clear
2. check there is no build up of algae. Especially check around ‘dead’ areas like pool steps where water flow isn’t as great.
3. check there is a good flow from the water jets
4. check there is a good flow of water in the skimmer
5. check there is no excess leaves or other debris in the pool
6. make sure there is correct pressure in the pool filter

Twice A Week (around 30 mins)

1. measure chlorine, pH and stabiliser levels
2. clean out the skimmer
3. brush the sides and bottom of the pool

Weekly

1. dose of phosphate remover

 Monthly

1. professional check on water levels by local pool shop

Regular maintenance will prevent the need for pool “shocking” and actually save you a lot of time in the long run buy addressing problems before they get out of hand. When the pool balance gets too far out and you have to pool “Shock”, you have to wait at least 1 day before you can swim, so regular checking of chemical levels means your pool is not only always ready for fun, but your chemical usage is at its minimum (which is good for your health too!). A quick brush of the pool surface once or twice a week also removes build up more easily that if it is left harden over time.

Fabric Solutions Provide Cost Effective Pool Cover

Pool Cover are a great addition to a pool, making maintenance easier and cheaper. By looking after your pool cover you can maximize its useful lifespan and get the most out of your pool.

Once you have worked out the best solution for what you want to do, and have installed it, make sure to adjust any chemical settings as needed. Water quality and conditions can vary greatly from place to place, so consult with your local pool shop. They are usually best to advise for the area that you live in. Managing your chemical levels is quite import as evaporation rates and the amount of UV entering the pool drops. This means there is less chlorine breakdown, so you don’t need as much. Too much chlorine will also affect your pool cover, shortening its useful lifespan. In fact too much chlorine will have a bigger effect on a pool blanket than UV exposure.

The last part to consider is how you store you pool cover. This is an important part that many people overlook. Ideally your pool cover is stored on a roller with its own supplied cover. This keeps it away from the weather, sun as well as protecting it. It also makes it a lot easier to remove and install the pool cover and you are less likely to damage it. If you can’t afford a pool cover, you should try to dry your cover as much as possible before folding it. Otherwise pool water becomes trapped inside the folders. Also store the pool cover away from sunlight and weather in a place that it won’t get bumped.

Website:- http://www.fabricsolutions.com.au

 Address:- 21-23 Access Ave, Yatala, QLD 4207

 Country:- AUSTRALIA

 Post Code:- 4207

 Phone: 0738070200

 Fax: +61 (07) 3807 8217

 Email: info@fabricsolutions.com.au

General Pond Location Considerations

After the chilly months of winter, now Spring is here and the weather is warming up, now is the perfect time to get back into the garden. The first thing to do is tidy up and get rid of the winter weeds. Then you can consider planting flowers, growing vegetable or even adding in small aquatic pond.

Ponds are a great way to an attractive feature to a garden and can be as small or as large as you want. Here are a few tips to make sure you get the most from your pond.

General Pond Safety Considerations

Although ponds are very simple, you should still check with your local council on any regulations that may be in place. There may be restrictions on the maximum depth etc. Also it is always prudent to check that there are no pipes underneath where you want to dig, especially if you are going to use an excavator.

General Pond Location Considerations

As with anything to do with real-estate, its all about location, location, location. So when deciding where to put your pond, consider these factors;

1. Ensure that the area receives the ideal amount of at least 6 hours of sunlight a day, as this is best for flowers and plants.

2. Avoid putting a pond under tree(s) as they will collect leaves easily, adding organic matter to the pond and driving algae growth. Trees do provide shade to aquatic life though. So if you do want trees next to your pond, make sure you choose carefully as some trees are also poisonous to ponds..

3. Tree root systems can also have the potential to damage pond liners.

4. Avoid designs that allow water to drain into your pond directly, and avoid positioning a pond in drainage paths.

5. To save on water you can connect your pond as part of your rainwater system.

6. Water that drains out of your pond should always drain away from your house.

When choosing a material, consider the temperate range where you will install, and how long you intend to have the pond for. EPDM is a great choice, but you don’t need a liner that will last 30 years if you are only renting a house for a little while! And likewise don’t use PVC if you are making an aquatic pond such as a koi pond.

For More Information Visit:- Pond Liner

Most important aspect of any pool liners

Pool liners are a great and cost effective way to rejuvenate a pool.There is nothing like the joy that having a swimming pool in your own backyard can bring. Not only can you cool down on hot days, but they enhance the look of your backyard.  But swimming pools can be expensive to maintain, especially when the chemistry gets out of balance. These are 2 basic things you can do to maintain a healthy swimming pool and reduce the time you looking after it.

Chemical Balance: The most important aspect of any swimming pool is to keep all the chemicals in check and at optimum levels. Maintenance need not be time consuming either, and should only take a few minutes each day. To ensure the right pool chemical balance,

Daily (around 5mins when all is good with the pool)
1.    check that the water is crystal clear
2.    check there is no build up of algae. Especially check around ‘dead’ areas like pool steps where water flow isn’t as great.
3.    check there is a good flow from the water jets
4.    check there is a good flow of water in the skimmer
5.    check there is no excess leaves or other debris in the pool
6.    make sure there is correct pressure in the pool filter

Twice A Week (around 30 mins)
1.    measure chlorine, pH and stabiliser levels
2.    clean out the skimmer
3.    brush the sides and bottom of the pool

Weekly
1.    dose of phosphate remover

Monthly

1. Professional check on water levels by local pool shop

Regular maintenance will prevent the need for pool “shocking” and actually save you a lot of time in the long run buy addressing problems before they get out of hand. When the pool balance gets too far out and you have to pool “Shock”, you have to wait at least 1 day before you can swim, so regular checking of chemical levels means your pool is not only always ready for fun, but your chemical usage is at its minimum (which is good for your health too!). A quick brush of the pool surface once or twice a week also removes build up more easily that if it is left harden over time. Inground or aboveground there are lot of patterns available and they are custom made to fit your pool exactly.

For many aboveground pools, they are pretty simple to measure and nearly all are made to a standard size. Even better for the DIY person is that with a bit of care its not too hard to install one yourself.

Inground pools are a different matter though. Nearly all inground pools are custom made, so no two are the same. The installer will use a special 3D measuring tool to measure the exact shape of the pool shell. This is then feed into a computer, which will pattern a new liner. This liner then needs to be installed by a professional crew in order to ensure a perfect fit that will last the longest.

Use a Pool Cover: Debris entering the pool is one of the largest sources of contaminants (the other being the people who swim in it!). So when not in use, cover the pool with a pool blanket. Besides eliminating a lot of debris, there are many other benefits to a pool cover that make them a cost effective choice, including;
1.    reduces chemical usage, this is mandatory too! When the levels are too high, they can damage the pool cover.
2.    traps heat in winter, making the pool warmer by up to 8oC
3.    helps keep dust and debris out, which means you pool is cleaner for longer
4.    significantly reduces water evaporation

There are a number of differences in pool blankets, the biggest being the quality. But the basic rule of thumb is that the thinner the pool blanket, the shorter the lifespan. A pool blankets thickness is measured in microns and typically come in 400, 500 and 600 micron thicknesses. Always when installing, make sure the pool cover is installed bubble side down. Higher end pool blankets will also have some sort of thermal insulation. You should also consider a pool roller system, as they are the easiest way to store and care for your pool blanket when not in use.

Great Water Storage Ideas

Simple and effective, storing water in a bladder is the new way to go. There are a number of ways that water, and even other liquids like diesel fuel and waste water can be stored, depending on what you are doing. Here we list a couple of examples.

Rainwater Collecting at Home

More and more people are using water tanks, even in residential areas to collect rainwater for either drinking or to help in the garden. However rainwater tanks can only be installed on level ground and take up a fair bit of space. This restricts some properties from installing a rain water tank or limits them to small amounts of storage. This is where a water storage bladder is of great use, as they are custom made to fit into any wasted building space. Anywhere around your house a person can get into, you can install a water storage bladder.

Water storage bladders are unique in that can be hidden away underneath decks, underneath stairwells and other building cavities. This means there is no ugly storage vessel that has to be made to fit in with your landscaping. Plus this opens up the potential to store a lot more water than you might otherwise be able to with a tradition rain water tank.

Temporary storage of water

When a pool has to be renovated, the water has to be drained first. At several thousand litres if you don’t have anywhere to put this, is must be carted away or put down the drain. Then you will have to pay to refill the pool once renovations are completed. With a water storage bladder you don’t have too, this water can be stored onsite in a water storage bladder and then re-used once the pool needs filling.

The storage of water is not limited to pool water either. Potable water, like water that is collected in a rainwater tank, can also be safely stored.

Camping, boating and 4wding

A great Australian past time is 4wding, boating and camping. Get off the beaten track and far away from the city and relax. With a water bladder you can extend your duration, allowing you to stay longer and go further. Water storage bladders can also be made to store waste water such as grey water or sewage, or even made from special materials to store fuels like diesel or aviation fuel.

Unlike rigid canisters, water storage bladders are also made so they can fit in odd areas like foot wells, rear cargo areas and many places where a rigid canister would be awkward to place. Water storage bladders also only take up as much space as they are filled too. This means space is used more efficiently and there is no airspace in the container when partially filled. Better yet, when empty a water bladder can simply be rolled up and takes up even less space.

How to Look After Your Water Tank Liner

Tank Liners are great way to extend the life of a leaking tank. Looked after properly, a tank liners will provide many years of service. To make sure you do get the maximum lifespan from a liner, there are a few maintenance procedures you should follow. Regardless of how the tank is maintained, it is recommended that the tank is inspected at least every 2 years for sludge and sediment build up at the bottom of the tank. Also check that all openings, inlets and overflows are either securely closed or that insect proof mesh is used.

Preventing Contamination: - As with health, prevention is the best cure. So to, if you minimise or stop contamination from entering the tank, then cleaning is easier and sludge and containments will take longer to build up.

1. Keep roof areas clear of overhanging vegetation. This also stops roosting points for birds and access by small animals such as possums, rodents and cats.
2. Make sure hatches are closed and use screens over inlets and overflows to prevent access by small animals and birds.
3. Keep gutters clean and use gutter shields to stop the collection of larger material.
4. Make sure all piping is compliant to Australian standards
5. Do not connect to any part of the roof where containments maybe present, such as bitumen coated roofs, preservative treated woods, uncoated lead flashing etc.
6. Do no swim inside a storage tank
7. Prevent mosquitos breeding. Anywhere water can pool can become a breeding ground for mosquitos and other insects. Use tight fitting lids or insect proof screens on all access points, inlets and overflow areas. Both Queensland and the Northern Territory specify screens as follows:

Qld – brass, copper, aluminium or stainless steel gauze no coarser than 1 mm aperture measure.

NT – brass or bronze wire not coarser than 7 meshes to the centimetre (each way) and of 33 gauge wire.

What To Look For

Aside from regular inspections, you should regularly check the water condition. Rainwater from a water tank should be soft, clear and almost tasteless. If any of these changes, your tank needs to be inspected. There are 3 basic changes with the water to look out for:

1. changes to the colour of the water. If it becomes discoloured it is a sign that there are containments in the water
2. smells and foul odours are signs that algae might be growing, there is rotting vegetation or dead animals are present.
3. Foul taste is also a sign that containments are present.

Cleaning A Tank

Over time sludge and other debris will accumulate at the bottom of a tank. How fast this occurs will depend on a number of factors. Usually the sludge at the bottom of a tank can be siphoned off without the need to empty the tank. If the debris is coarse, you may need to use a hose up to 50 mm in diameter.

In some cases you may need to drain the tank to clean it. Choose carefully what you will clean the tank with as harsh chemicals can destroy a tank liner or can contaminate the water. Also be careful not to damage the liner when cleaning, so this means don’t wear shoes and avoid using any sharp instruments that can tear or pierce the liner. For extreme cases, such as a dead animal has been in the tank, consider using a professional tank cleaning service.

If you do enter the tank, ensure that there is adequate ventilation and work with at least one other person present.

The Australian Government has a comprehensive resource guide on tank water contaminates and cleaning. https://www.health.gov.au/internet/main/publishing.nsf/Content/D3E8C00F3041304BCA257BF0001C685A/$File/env_rainwater.pdf

How to Look After Your Water Tank Liner

Tank Liners are great way to extend the life of a leaking tank. Looked after properly, a Tank Liners will provide many years of service. To make sure you do get the maximum lifespan from a liner, there are a few maintenance procedures you should follow. Regardless of how the tank is maintained, it is recommended that the tank is inspected at least every 2 years for sludge and sediment build up at the bottom of the tank. Also check that all openings, inlets and overflows are either securely closed or that insect proof mesh is used.

Preventing Contamination: - As with health, prevention is the best cure. So to, if you minimise or stop contamination from entering the tank, then cleaning is easier and sludge and containments will take longer to build up.

1. Keep roof areas clear of overhanging vegetation. This also stops roosting points for birds and access by small animals such as possums, rodents and cats.
2. Make sure hatches are closed and use screens over inlets and overflows to prevent access by small animals and birds.
3. Keep gutters clean and use gutter shields to stop the collection of larger material.
4. Make sure all piping is compliant to Australian standards
5. Do not connect to any part of the roof where containments maybe present, such as bitumen coated roofs, preservative treated woods, uncoated lead flashing etc.
6. Do no swim inside a storage tank
7. Prevent mosquitos breeding. Anywhere water can pool can become a breeding ground for mosquitos and other insects. Use tight fitting lids or insect proof screens on all access points, inlets and overflow areas. Both Queensland and the Northern Territory specify screens as follows:

Qld – brass, copper, aluminium or stainless steel gauze no coarser than 1 mm aperture measure.

NT – brass or bronze wire not coarser than 7 meshes to the centimetre (each way) and of 33 gauge wire.

What To Look For:- Aside from regular inspections, you should regularly check the water condition. Rainwater from a water tank should be soft, clear and almost tasteless. If any of these changes, your tank needs to be inspected. There are 3 basic changes with the water to look out for:

1. changes to the colour of the water. If it becomes discoloured it is a sign that there are containments in the water
2. smells and foul odours are signs that algae might be growing, there is rotting vegetation or dead animals are present.
3. Foul taste is also a sign that containments are present.

Cleaning A Tank:- Over time sludge and other debris will accumulate at the bottom of a tank. How fast this occurs will depend on a number of factors. Usually the sludge at the bottom of a tank can be siphoned off without the need to empty the tank. If the debris is coarse, you may need to use a hose up to 50 mm in diameter.

In some cases you may need to drain the tank to clean it. Choose carefully what you will clean the tank with as harsh chemicals can destroy a tank liner or can contaminate the water. Also be careful not to damage the liner when cleaning, so this means don’t wear shoes and avoid using any sharp instruments that can tear or pierce the liner. For extreme cases, such as a dead animal has been in the tank, consider using a professional tank cleaning service.

If you do enter the tank, ensure that there is adequate ventilation and work with at least one other person present.

The Australian Government has a comprehensive resource guide on tank water contaminates and cleaning. 

https://www.health.gov.au/internet/main/publishing.nsf/Content/D3E8C00F3041304BCA257BF0001C685A/$File/env_rainwater.pdf

Leaks in Rural and Farm Dams

Dams are valuable resources on farm, being the source of water to feed livestock and provide irrigation for crops. A common misconception people have is that if a dam leaks, it probably wasn’t built properly and a cheap dam liner can be utilised to fix the problem. However it is much more complex and soil conditions determine how the dam is to be initially constructed. Ideally a dam is build on a clay based soil, any other soil to some degree will leak. The worst soils are sandy, loam based soils and shale rock soils, as these will leak the most. Dams are then made with either a clay or bentonite layer and the use of things like dam liners is uncommon as the cost is higher. Dam liners are only employed where other sealing techniques have failed, but can guarantee that no further leaking will occur.

 Aside from the soil condition, dam leakage can also occur by ground movement, erosion, incursion by tree roots and damage from livestock, just to name a few. In cases where leakage occurs, several different types of solutions can be undertaken:

- Rebuild a new dam at a different site.

- Adding a sealant to the dam, however success is low when there is still water in the dam and it is greatly increased with the dam empty. Adding a sealant to a full dam means that the application is largely uncontrolled, and thus success is not guaranteed. The treated layer will also not be compacted making it prone to being disturbed and damaged. Sealants include synthetic polymers, clays such as sodium and calcium bentonite clay and other materials like gypsum.

- Other options include the use of sodium trip polyphosphate (for certain soil conditions), bitumen and concrete .

- Completely cleaning out the dam, and re-compact the soil

- Use of a dam liner, often very expensive, but has a very high success rate and can last from 10 to 30 yrs depending on soil conditions and material choice

 

When looking at a dam liner, there are a few different types of material that can be used, including:

1. Polypropylene and Polyethylene are the most common types of liners.
2. PVC was once a common usage for large dams, but not so any more. It is too costly and doesn’t offer a long life expectancy. It is still suitable for smaller installs though.
3. A quality HDPE liner can provide for a long life expectancy, and
4. EPDM and butyl based rubber liners tend to give the longest lifespans, with 30+ yrs not being uncommon.

For further information on leaking dams and possible remedies, we recommend reading the resource on leaking dams is provided by the Western Australian Government at

http://archive.agric.wa.gov.au/objtwr/imported_assets/content/lwe/water/eng/fn005_2003.pdf

also see the NSW Government’s resource handbook on dams, which discusses methods of fitting the dam-liners into the eco-systems:

http://www.sca.nsw.gov.au/__data/assets/pdf_file/0005/39704/FarmDamFinalLR.pdf

Extend your travel time with a portable recreational fuel or water bladder

Boating, fishing or camping, you can enjoy longer trips away by conveniently storing extra fuel and water onboard with a custom made bladder.

Unlike rigid plastic and metal canisters, a bladder tank can be custom made to suit your vehicle, boat or even motorbike.

And when empty, they roll up to a fraction of the final fill size and weigh little compared to the final fill weight.

The flexibility of a bladder also means you can store them in recesses such as rear footwells, rear or side cargo areas, and many other places that would be hard to fit a rigid canister.

When considering a bladder, be it for fuel, water or some other liquid, make sure its fit for purpose. This means in the case of fuel, the material is rated to hold fuel and won’t leak or weep over time. Not all fuels are the same and for a fuel like unleaded petrol the bladder will have to be specially made if they are to last. In the case of water, the material should be a potable grade material, meaning it is water safe and will have no after taste from the material.

 Other points to look for when buying a bladder is to make sure:

1. It is puncture resistant, as you don’t want it leaking in the car!
2. Weather resistant – you will be outdoors after all
3. It is not cheaply produced, sealing and joining techniques such as heat or hf welding are much more stronger than a chemical or glue bonds.

Apart from fuel and water you can also store liquids like black and grey water.

Advantages here are the bladder will only fill as required, with no airspace.

This reduces contamination problems and means you only use the minimum amount of space needed.

Water and fuel bladders can be made in sizes to store liquids from 100 litres to 500 litres. You should always be aware of the amount stored, as a litre of liquid is roughly 1 kg of weight.

Finally, another great advantage of a bladder is that there is a great range of standard fittings that you can customise them with, such as:

1. Breather/Vents
2. Elbow fittings
3. Valves
4. Garden hose fittings
5. Barbed fittings
6. Skin fittings
7. Tie downs

So next time you plan a long camping trip consider taking a water or fuel bladder along for the ride and enjoy a longer time away.

For More Information Visit:-  Water Bladder

Bladders are an easy and economical way of storing your water

Even when space is land limited, you can still store water

Bladder tanks, when empty, roll up to a fraction of the final fill size and weigh little compared to the final fill weight. This means you can usually fit a bladder tank anywhere a person can get into. Bladder tanks are then the ideal solution for water storage where there is limited space. Bladder tanks are also called pillow tanks, rain water bladders or just water bladders.

The water bladder can also be made to the size and shape of the cavity, where it is long and thin or square, so you can capture more rainwater without taking up precious space. Also since the installation is usually out of sight.

So if you could make use of this wasted space, why wouldn’t you? Areas where there is no structural support and limited access can still be utilised with a bladder tank. Spaces might include an underneath house water tank or under a verandah or deck attached to the house. Other places can include sheds, stairwells, pool sheds and much more.

In both cases, the tank areas can be connected to the down pipes so rainwater can be collected and stored, with excess water diverted to the existing storm water drain.

There are two ways a bladder can be installed, either framed or unframed. Both installation methods have benefits:

Framed Bladder Tanks:

- You can store up to 20% more water for the same area, as the bladder can fill more water into the frame and harness

- A frame will set the size that the bladder can go to, preventing the bladder from filling too much and touching the part of the building structure.

-  The additional frame and components make this type of installation more expensive

Unframed Bladder Tanks:

- When not using a frame, reinforced material is used. This will not stretch like a framed bladder reducing the comparative capacity.

- As the bladder fills, so to will the footprint of the bladder increase, changing as the tank empties and fills

- This means that the bladder has to be set in place properly so that it doesn’t expand too much and touch part of the building. Bladders are    also more prone to shifting due to heavy rains or uneven ground.

-  It is always cheaper to install a bladder without a frame, and perfectly safe to do so.

When considering a bladder tank, make sure you see a professional manufacture like Fabric Solutions Australia, that way you will get the right expert advice. Remember every liter of water weights 1 kg, so a 1000 liter tank is one ton of weight, so make sure you get the installation right the first time and enjoy years of out of sight rain water collecting.

 For More Information Visit:-  Water Bladder Tanks

Tank liners for commercial and industrial uses

Extending the Life of a water tank

After many years of use, a water tank may start to slowly leak. This can be from a number of reasons. A concrete tank can gets cracks from small ground movements. A plastic tank may split at the seams over time or from UV degradation. Your options for repair will then depend on the type of tank you have.

               

Types of Tanks:

Concrete – a very solid construction, requiring good ground preparation. Bushfire proof and the only type of tank that can be placed in-ground. Concrete has a high thermal mass, naturally keeping stored water cooler as well as neutralizing acid in the water. Cooler water means much lower risk of algae blooms and other bacteria forming. However can be prone to cracking with ground movements. Tends to be the worst for overall environmental impact.

Poly Tank – a lighter more cost effective solution that is very popular in residential situations. Tanks are made from polyethylene in a variety of colours with minimal impact on the environment . The tanks are generally easy to maintain and are 100% recyclable. Poly tanks are very strong, won’t rust and less likely to crack than concrete tanks. Tanks come with a minimum 10yr guarantee, but tend to use BPA and UV inhibitors in the manufacturing process. Poly tanks also have a very low thermal mass, so water will warm on hot days, which can be an issue with bacterial growth.

Steel Modular Panel Tanks – long life span (usually a 20yr warranty) and keeps water cool. Comes in a range of styles and finishes, with a flat roof structure. Stainless steel tanks can also be considered the best environmentally, with almost 100% recyclability at end of life, but tends to be the most expensive.

When fixing a tank, there are only a few methods that can be be considered:

Application of a sealant

Pros – inexpensive for concrete tanks if done properly and is some cases the water won’t need to be drained before application.

Cons – will not generally work on poly tanks, and needs to be flexible to accommodate tank movement.

Welding (plastic or steel)

Pros – This is an effective way to repair poly tanks, as done properly the weld is about as strong as the original plastic.

Cons – need to remove water to make repairs, and join strength is dependent on the skill of the operator.

Use of a tank liner

Pros – very flexible and will move accommodate ground movements easily. Custom made to fit any tank. Usually comes with a 10yr guarantee. Will fit any almost any tank that is still structurally sound. Does not usually need the same level of preparation as applied coatings do. Also if you can get inside the tank, you can usually install the liner yourself.

Cons – you will have to empty the tank. Must be careful with abrasive surfaces as it is possible to puncture lining.

For More Information Visit:- Tank Liner

Secondary containment liner or portable spill bund

Don’t Let One Spill Ruin Your Day

In this new age of safety, it is important to remember legal and moral obligations to provide and keep a safe work place. When hazardous chemicals and liquids are being used, it is very important to take a pro-active approach to managing potential spills. One spill can literally ruin your whole day with the cost and effort that goes into the clean up. Prevention is then the answer.This is where spill containment liners become an important asset in the workplace. Used in either permanent or portable applications, a spill containment liner will do as it suggests – contain a spill. Whether its water, fuel or some other substance, a contained spill is much easier and cheaper to clean up, and there is much less impact on the environment.

 

Secondary Containment liners are designed and used as a solution both for the permanent or temporary containment of liquids or substances that are potentially hazardous to the environment. A company like Fabric Solutions Australia can produce secondary containment liners to suit almost any situation for both. Temporary or permanent applications. Each secondary containment liner or portable spill bund is made to suit the application, with many different polymeric materials available, depending on the chemicals or contaminants involved.

Usage of a spill containment liner can be installed in large permanent areas such as fuelling stations, but can also be utilised in smaller applications with a spill bund, such as with generators, compressors and other onsite machinery that uses potentially hazardous liquids or substances.

Drive over models are also available and can have either foam filled sides or collapsible sides depending on application.

Spill bunds also come with a wide array of options, including:

• The fitting of drain points and/or collection sumps

• Supplied with protective groundsheets, floor inserts or wheel tracks available

• Can be custom made to whatever size and shape required

• For use in almost any terrain

So consider the use of a spill containment system on your worksite and don’t let one spill ruin your day.

For More Information Visit: – Portable Bund Liner

Secondary containment liner or portable spill bund

Don’t Let One Spill Ruin Your Day

In this new age of safety, it is important to remember legal and moral obligations to provide and keep a safe work place. When hazardous chemicals and liquids are being used, it is very important to take a pro-active approach to managing potential spills. One spill can literally ruin your whole day with the cost and effort that goes into the clean up. Prevention is then the answer.This is where spill containment liners become an important asset in the workplace. Used in either permanent or portable applications, a spill containment liner will do as it suggests – contain a spill. Whether its water, fuel or some other substance, a contained spill is much easier and cheaper to clean up, and there is much less impact on the environment.

 Secondary Containment liners are designed and used as a solution both for the permanent or temporary containment of liquids or substances that are potentially hazardous to the environment. A company like Fabric Solutions Australia can produce secondary containment liners to suit almost any situation for both. Temporary or permanent applications. Each secondary containment liner or portable spill bund is made to suit the application, with many different polymeric materials available, depending on the chemicals or contaminants involved.

Usage of a spill containment liner can be installed in large permanent areas such as fuelling stations, but can also be utilised in smaller applications with a spill bund, such as with generators, compressors and other onsite machinery that uses potentially hazardous liquids or substances.

Drive over models are also available and can have either foam filled sides or collapsible sides depending on application.

Spill bunds also come with a wide array of options, including:

• the fitting of drain points and/or collection sumps

• supplied with protective groundsheets, floor inserts or wheel tracks available

• Can be custom made to whatever size and shape required

• For use in almost any terrain

So consider the use of a spill containment system on your worksite and don’t let one spill ruin your day.

For More Information Visit: – Portable Bund Liner

Fabric Solutions Australia provide quality custom shape void liners

Often the desire for a water tank is left unmet due to space restrictions,. However in some cases even though you think you might not have the space for a standard rain water tank, you may unknowingly still have space for something similar. During the construction of commercial and domestic buildings, there are always little spaces or voids that can’t traditionally be utilised. If you could make use of this wasted space, why wouldn’t you?

While a tank takes up exterior space, a custom void liner can make use of empty building cavities by utilising that space for storage of water. Companies like Fabric Solutions Australia, aim to provide the highest quality custom shape void liners that are perfect for water storage use inside building cavities. These liners are an ideal solution for a waterproof coating as a flexible membrane can move with the building structure. Liners are also made from potable material that is algae resistant, so you know your water is stored safely.

Suitable building cavities and voids can be in areas such as underneath stairwells or inside a basement, basically any cavity that has some structural support and a person can fit into. Also many different types of lining material are available depending on the application, which means you may not be limited to just storing drinking water.

Areas where there is no structural support and limited access, can still be utilised with a bladder tank. Areas might include the underneath of decks or even the house. In both cases, the tank areas can be connected to the down pipes so rainwater can be collected and stored, with excess water diverted to the existing storm water drain.

For More Information Visit:- Void Liners