Extend your travel time with a portable recreational fuel or water bladder

Boating, fishing or camping, you can enjoy longer trips away by conveniently storing extra fuel and water onboard with a custom made bladder.

Unlike rigid plastic and metal canisters, a bladder tank can be custom made to suit your vehicle, boat or even motorbike.

And when empty, they roll up to a fraction of the final fill size and weigh little compared to the final fill weight.

The flexibility of a bladder also means you can store them in recesses such as rear footwells, rear or side cargo areas, and many other places that would be hard to fit a rigid canister.

When considering a bladder, be it for fuel, water or some other liquid, make sure its fit for purpose. This means in the case of fuel, the material is rated to hold fuel and won’t leak or weep over time. Not all fuels are the same and for a fuel like unleaded petrol the bladder will have to be specially made if they are to last. In the case of water, the material should be a potable grade material, meaning it is water safe and will have no after taste from the material.

 Other points to look for when buying a bladder is to make sure:

1. It is puncture resistant, as you don’t want it leaking in the car!
2. Weather resistant – you will be outdoors after all
3. It is not cheaply produced, sealing and joining techniques such as heat or hf welding are much more stronger than a chemical or glue bonds.

Apart from fuel and water you can also store liquids like black and grey water.

Advantages here are the bladder will only fill as required, with no airspace.

This reduces contamination problems and means you only use the minimum amount of space needed.

Water and fuel bladders can be made in sizes to store liquids from 100 litres to 500 litres. You should always be aware of the amount stored, as a litre of liquid is roughly 1 kg of weight.

Finally, another great advantage of a bladder is that there is a great range of standard fittings that you can customise them with, such as:

1. Breather/Vents
2. Elbow fittings
3. Valves
4. Garden hose fittings
5. Barbed fittings
6. Skin fittings
7. Tie downs

So next time you plan a long camping trip consider taking a water or fuel bladder along for the ride and enjoy a longer time away.

For More Information Visit:-  Water Bladder

Bladders are an easy and economical way of storing your water

Even when space is land limited, you can still store water

Bladder tanks, when empty, roll up to a fraction of the final fill size and weigh little compared to the final fill weight. This means you can usually fit a bladder tank anywhere a person can get into. Bladder tanks are then the ideal solution for water storage where there is limited space. Bladder tanks are also called pillow tanks, rain water bladders or just water bladders.

The water bladder can also be made to the size and shape of the cavity, where it is long and thin or square, so you can capture more rainwater without taking up precious space. Also since the installation is usually out of sight.

So if you could make use of this wasted space, why wouldn’t you? Areas where there is no structural support and limited access can still be utilised with a bladder tank. Spaces might include an underneath house water tank or under a verandah or deck attached to the house. Other places can include sheds, stairwells, pool sheds and much more.

In both cases, the tank areas can be connected to the down pipes so rainwater can be collected and stored, with excess water diverted to the existing storm water drain.

There are two ways a bladder can be installed, either framed or unframed. Both installation methods have benefits:

Framed Bladder Tanks:

- You can store up to 20% more water for the same area, as the bladder can fill more water into the frame and harness

- A frame will set the size that the bladder can go to, preventing the bladder from filling too much and touching the part of the building structure.

-  The additional frame and components make this type of installation more expensive

Unframed Bladder Tanks:

- When not using a frame, reinforced material is used. This will not stretch like a framed bladder reducing the comparative capacity.

- As the bladder fills, so to will the footprint of the bladder increase, changing as the tank empties and fills

- This means that the bladder has to be set in place properly so that it doesn’t expand too much and touch part of the building. Bladders are    also more prone to shifting due to heavy rains or uneven ground.

-  It is always cheaper to install a bladder without a frame, and perfectly safe to do so.

When considering a bladder tank, make sure you see a professional manufacture like Fabric Solutions Australia, that way you will get the right expert advice. Remember every liter of water weights 1 kg, so a 1000 liter tank is one ton of weight, so make sure you get the installation right the first time and enjoy years of out of sight rain water collecting.

 For More Information Visit:-  Water Bladder Tanks

Tank liners for commercial and industrial uses

Extending the Life of a water tank

After many years of use, a water tank may start to slowly leak. This can be from a number of reasons. A concrete tank can gets cracks from small ground movements. A plastic tank may split at the seams over time or from UV degradation. Your options for repair will then depend on the type of tank you have.

               

Types of Tanks:

Concrete – a very solid construction, requiring good ground preparation. Bushfire proof and the only type of tank that can be placed in-ground. Concrete has a high thermal mass, naturally keeping stored water cooler as well as neutralizing acid in the water. Cooler water means much lower risk of algae blooms and other bacteria forming. However can be prone to cracking with ground movements. Tends to be the worst for overall environmental impact.

Poly Tank – a lighter more cost effective solution that is very popular in residential situations. Tanks are made from polyethylene in a variety of colours with minimal impact on the environment . The tanks are generally easy to maintain and are 100% recyclable. Poly tanks are very strong, won’t rust and less likely to crack than concrete tanks. Tanks come with a minimum 10yr guarantee, but tend to use BPA and UV inhibitors in the manufacturing process. Poly tanks also have a very low thermal mass, so water will warm on hot days, which can be an issue with bacterial growth.

Steel Modular Panel Tanks – long life span (usually a 20yr warranty) and keeps water cool. Comes in a range of styles and finishes, with a flat roof structure. Stainless steel tanks can also be considered the best environmentally, with almost 100% recyclability at end of life, but tends to be the most expensive.

When fixing a tank, there are only a few methods that can be be considered:

Application of a sealant

Pros – inexpensive for concrete tanks if done properly and is some cases the water won’t need to be drained before application.

Cons – will not generally work on poly tanks, and needs to be flexible to accommodate tank movement.

Welding (plastic or steel)

Pros – This is an effective way to repair poly tanks, as done properly the weld is about as strong as the original plastic.

Cons – need to remove water to make repairs, and join strength is dependent on the skill of the operator.

Use of a tank liner

Pros – very flexible and will move accommodate ground movements easily. Custom made to fit any tank. Usually comes with a 10yr guarantee. Will fit any almost any tank that is still structurally sound. Does not usually need the same level of preparation as applied coatings do. Also if you can get inside the tank, you can usually install the liner yourself.

Cons – you will have to empty the tank. Must be careful with abrasive surfaces as it is possible to puncture lining.

For More Information Visit:- Tank Liner

Secondary containment liner or portable spill bund

Don’t Let One Spill Ruin Your Day

In this new age of safety, it is important to remember legal and moral obligations to provide and keep a safe work place. When hazardous chemicals and liquids are being used, it is very important to take a pro-active approach to managing potential spills. One spill can literally ruin your whole day with the cost and effort that goes into the clean up. Prevention is then the answer.This is where spill containment liners become an important asset in the workplace. Used in either permanent or portable applications, a spill containment liner will do as it suggests – contain a spill. Whether its water, fuel or some other substance, a contained spill is much easier and cheaper to clean up, and there is much less impact on the environment.

 

Secondary Containment liners are designed and used as a solution both for the permanent or temporary containment of liquids or substances that are potentially hazardous to the environment. A company like Fabric Solutions Australia can produce secondary containment liners to suit almost any situation for both. Temporary or permanent applications. Each secondary containment liner or portable spill bund is made to suit the application, with many different polymeric materials available, depending on the chemicals or contaminants involved.

Usage of a spill containment liner can be installed in large permanent areas such as fuelling stations, but can also be utilised in smaller applications with a spill bund, such as with generators, compressors and other onsite machinery that uses potentially hazardous liquids or substances.

Drive over models are also available and can have either foam filled sides or collapsible sides depending on application.

Spill bunds also come with a wide array of options, including:

• The fitting of drain points and/or collection sumps

• Supplied with protective groundsheets, floor inserts or wheel tracks available

• Can be custom made to whatever size and shape required

• For use in almost any terrain

So consider the use of a spill containment system on your worksite and don’t let one spill ruin your day.

For More Information Visit: – Portable Bund Liner

Secondary containment liner or portable spill bund

Don’t Let One Spill Ruin Your Day

In this new age of safety, it is important to remember legal and moral obligations to provide and keep a safe work place. When hazardous chemicals and liquids are being used, it is very important to take a pro-active approach to managing potential spills. One spill can literally ruin your whole day with the cost and effort that goes into the clean up. Prevention is then the answer.This is where spill containment liners become an important asset in the workplace. Used in either permanent or portable applications, a spill containment liner will do as it suggests – contain a spill. Whether its water, fuel or some other substance, a contained spill is much easier and cheaper to clean up, and there is much less impact on the environment.

 Secondary Containment liners are designed and used as a solution both for the permanent or temporary containment of liquids or substances that are potentially hazardous to the environment. A company like Fabric Solutions Australia can produce secondary containment liners to suit almost any situation for both. Temporary or permanent applications. Each secondary containment liner or portable spill bund is made to suit the application, with many different polymeric materials available, depending on the chemicals or contaminants involved.

Usage of a spill containment liner can be installed in large permanent areas such as fuelling stations, but can also be utilised in smaller applications with a spill bund, such as with generators, compressors and other onsite machinery that uses potentially hazardous liquids or substances.

Drive over models are also available and can have either foam filled sides or collapsible sides depending on application.

Spill bunds also come with a wide array of options, including:

• the fitting of drain points and/or collection sumps

• supplied with protective groundsheets, floor inserts or wheel tracks available

• Can be custom made to whatever size and shape required

• For use in almost any terrain

So consider the use of a spill containment system on your worksite and don’t let one spill ruin your day.

For More Information Visit: – Portable Bund Liner

Fabric Solutions Australia provide quality custom shape void liners

Often the desire for a water tank is left unmet due to space restrictions,. However in some cases even though you think you might not have the space for a standard rain water tank, you may unknowingly still have space for something similar. During the construction of commercial and domestic buildings, there are always little spaces or voids that can’t traditionally be utilised. If you could make use of this wasted space, why wouldn’t you?

While a tank takes up exterior space, a custom void liner can make use of empty building cavities by utilising that space for storage of water. Companies like Fabric Solutions Australia, aim to provide the highest quality custom shape void liners that are perfect for water storage use inside building cavities. These liners are an ideal solution for a waterproof coating as a flexible membrane can move with the building structure. Liners are also made from potable material that is algae resistant, so you know your water is stored safely.

Suitable building cavities and voids can be in areas such as underneath stairwells or inside a basement, basically any cavity that has some structural support and a person can fit into. Also many different types of lining material are available depending on the application, which means you may not be limited to just storing drinking water.

Areas where there is no structural support and limited access, can still be utilised with a bladder tank. Areas might include the underneath of decks or even the house. In both cases, the tank areas can be connected to the down pipes so rainwater can be collected and stored, with excess water diverted to the existing storm water drain.

For More Information Visit:- Void Liners

Main Features of Secondary Containment Systems

Secondary Containment: – Secondary containment is a safeguard measure used to prevent accidental releases or spills of toxic or hazardous substances to the environment (water, soil & air). Secondary containment can be a structure that is chemically compatible to hold a release and remain liquid tight until clean up occurs. Secondary containment can also be an engineered means to redirect a spill away from water or other sensitive receptor to a temporary diversion system.Even the most safety conscious organisation can have an emergency, and preparing for one will depend on what hazardous substances you use and store.

If you store large amounts of hazardous substances, you will need secondary containment to minimise the extent of the spill and to help you recover the spilled substance.

The secondary containment system prevents hazardous liquids, or hazardous substances that may liquefy in a fire, from escalating to a point where staff at the site, the public, or the environment can be harmed.

The capacity of the secondary containment system depends on the type of container and the amount of hazardous substance stored.

What needs secondary containment?

Secondary containment requirements are not straightforward and regulatory guidance is not black and white. This is a good thing, because secondary containment should be adjusted to match site specific conditions without unnecessarily increasing project costs.

You typically expect the following materials and work activities to always have secondary containment:

• Fuel tanks
• Fuel transfer activities, for both mobile and stationary areas
• Volumes of stored or used liquid located adjacent/up gradient to water, where there is a reasonable potential of a worst case scenario spill could reach water. Examples such as:

1. Large volumes stored in drums and tanks
2. Large volumes used in large generators and pumps, hydraulic power packs
3. Moderate volumes located directly near water or unprotected drainage system that directly discharges to water

• Storage of material that may potentially pose a threat to human health or the environment that is not in constant or regular daily use

Consider the following factors when making a judgment call relating to secondary containment:

1. Surrounding environment

2. Timeframe in use

3. Condition of equipment

4. Security and vandalism

5. Weather

6. Available manpower

7. Equipment and materials

For More Information Visit: – Secondary Containment